AG Woodcare - Wood Finishes from Osmo, Liberon & more
Shopping Cart

Shopping Cart 0 Items (Empty)

01789 778628

Card Logos
Categories
Quick Store Search

Advanced Search

Free Delivery
Exterior Guide
Blogs & Articles

Get the perfect finishing touch with a French polish

31/07/2015 09:20:58:
Said to originate in France in the 16th and 17th century, French polish has been extremely popular s...

Finish off your floor with hard wax oils

27/07/2015 13:40:25:
As most floors in homes and businesses will experience heavy foot traffic on a regular basis, you ne...

Protecting structural and decorative timbers

17/07/2015 12:46:58:
Wood is a popular building material used for many parts of properties including roof joists, structu...

Keep your stone floors in pristine condition

15/07/2015 11:11:54:
Stone floors have grown in popularity in the last few years. They have of course been used for thous...

Protect the environment with specially formulated wood finishers

13/07/2015 12:59:50:
There was a time when environmentally friendly wood finishes for exterior products were criticised f...

Impra Impranol Elan Top Coat (Solvent-Based)

  • High Performance wood stain from Germany. 
  • A solvent based high-build coating with a satin finish and is ideally suited for windows and doors 
  • Being highly translucent it enhances the natural grain of the wood
  • Protects all wood from the harmful effects of the suns rays, as well as giving excellent water repellency Is moisture permeable and helps prevent the build up of moisture in timber.(maintains dimensional stability)
  • Excellent cover rate of approximately 14-16 sq. meters per litre and easy to apply. 
  • Available in 0.75L and 2.5L.
  • Colours -  Limba, Mahogany, Chestnut, Light Oak, Antique Oak, Walnut, Teak and colourless
  • (Colourless is unsuitable for exterior use on its own, due to the lack of UV protection) 
  • Colourless can be used on previously stained timbers to maintain an existing colour or mixed with other colours to obtain a lighter shade. 
  • Allow 12 hours drying time between coats.
  • To obtain maximum exterior durability apply a first coat of Impra Color then two coats of Impra Elan, 
  • Allow 12 hours drying time between coats.
  • Easy maintenance, wash down old surface with soap and water, no sanding required then apply another coat.
  • Clean equipment and brushes with white spirit or brush cleaner
For further  information on preperation and application methods, health and the environment, see the technical data sheet in the downloads tab.

Reviews and Ratings

You Might Also Like...