Rustins Clear Plastic Floor Coating
Rustin two part cold-cure floor lacquer with excellent adhesion and durability.
Almost colourless and will not craze or yellow on ageing.
Resistant to scratching, abrasion, most solvents, weak acids and alkali.
Can be applied to wood, cork, chipboard, MDF laminates, slate and stone.
For interior use only
The toughest floor finish available.13-15 sq m per litre per coat, 2 coats are usually sufficient on hard wood but in very heavy traffic areas apply a third coat may be required, soft woods and cork may require 3 coats minimum.
Supplied as a two pack with a hardener and clear lacquer to be mixed together before use, also supplied with plastic coating thinners.
Can also be used on all interior woodwork, (quicker drying than Rustins plastic coating)
(This product gives off a strong pungent vapour whilst curing)
No posts found