Rustins Plastic Floor Coating

In stock
(£23.81 inc VAT)

Rustins plastic floor coating is a two pack cold-cure floor lacquer with excellent adhesion and durability.

One of the toughest floor coating available today.

Available in 1L and 5L kits (kit includes thinners, catalyst and lacquer)


A two part cold-cure floor lacquer with excellent adhesion and durability.

Almost colourless and will not craze or yellow on ageing.
Resistant to scratching, abrasion, most solvents, weak acids and alkalis.

Can be applied to wood, cork, chipboard, MDF laminates, slate and stone.
For interior use only
The toughest floor finish available.13-15 sq m per litre per coat, 2 coats are usually sufficient on hard wood but in very heavy traffic areas apply a third coat may be required, soft woods and cork may require 3 coats minimum.
Supplied as a two pack with a hardner and clear lacquer to be mixed together before use, also supplied with plastic coating thinners.
Can also be used on all interior woodwork, (quicker drying than Rustins plastic coating)

A superb product.

(This product gives off a strong pungent vapour whilst cureing)

Available: 1L and 4L kits in a gloss or satin finish.
For further information and application methods, health and the environment see the technical data sheet in the attachment tab above.

Data Sheet (Plastic_Floor_Coating.pdf, 126 Kb) [Download]

Health & Safety Sheet (Plastic_Floor_Coating_img3-ar.pdf, 35 Kb) [Download]

No posts found

Write a review

Coverage Calculator

Good to know

Related products

Customers also bought