Wooden Flooring

Blanchon Remover, is a super-active cleaner/stripper for all types of floor polish and metallized polish. It is a powerful cleaning agent, which eliminates ingrained grime, and lifts old coats of Blanchon Protector and other coats of self polishing sealers. Thus, it prepares floors for a fresh protective coat of Protector Satin or Protector Matt . Odourless and requiring dilution in water before use, Removes the most stubborn stains without spoiling the finish Remover is recommended for most surfaces (prior to use, we recommend testing it in an out-of-the-way place). Once cleaned apply Blanchon Protector. Pack size: 1L & 5L Coverage: 1 litre of solution = approx 500 sqm for best method of application use the floor cleaning kit

Wood floor oil with a neutral look Gives the floor an untreated appearance Resistant to liquids such as water, coffee, tea and red wine Gives the wood a beautiful, breathable 'soft feel' surface  IBR-certified

A Quick Guide to Liberon Natural Finish Floor Varnish Superior, environmentally friendly natural finish floor varnish. Hard-wearing and long-lasting Ideal for use on soft or hardwood flooring Can also be used on all interior woodwork. Available in clear satin and clear matt soft sheen finishes Pack size 1L and 2.5L

Fiddes Barrier Seal provides a quick drying, surface barrier coat that is ideal for application onto oily, reclaimed or contaminated floor surfaces prior to application of Fiddes Hard Wax Oil or Fiddes Liquid Floor Wax.

Blanchon Natural Soap for oiled wood floors is for day-to-day cleaning of all oiled wood floors. Based on 100% plant based products enriched with natural ingredients. Available in Colourless and a (white version for white and white tinted floors). Blanchon natural soap for oiled wood floors is a 100% plant based product enriched with natural oils, which makes it ideal for frequent cleaning of all oiled wooden floors. It preserves and enhances their natural looking finish and boosts the protection of wood floors with each use. It should be diluted 100-125 ml per 5 litres with water and applied with a damp mop or cloth, use well wrung out to avoid getting the wood floor to wet. Rinse the mop or cloth regularly during cleaning. Blanchon natural soap is supplied as colourless and white (white for white or white tinted floors) Coverage: Around 400 to 500 sq m2 per litre (undiluted). Available in 1L* and 5L  *1L may be in a plain bottle decanted from a 5L

Blanchon Initial ® is a one component odourless water-based PU high-build lacquer for wooden floors. It does not change the wood colour. It is suitable for lounges, bed rooms, dining rooms and stairs. It can be used on most commonly used wood species. It's technical performance and formulation meet the most stringent ecological criteria: it contains less than 2% VOC as per Directive 2004/42/CE, it complies with the European Ecolabel environmental requirements and it is both user - and environmentally-friendly. Single component High-build lacquer Ideal for domestic applications Does not change the wood colour Very easy to apply Odourless Coverage 10 sq mtr per litr Available in a clear satin & clear matt finish Pack size 5L

A stainable, one part ready to use stopper and woodfiller for small holes and grain filling.

Blanchon Athen is a natural finish PU floor varnish for all wooden floors, can also be used on all interior joinery. A ready-to-use single component water-based wood floor varnish Really easy to apply. Quick drying & curing time means rapid return to use of the floor following completion. Does not change the wood colour. High resistance to wear & tear, water & staining. If using wood stains/Dyes use Blanchon S O Primer prior to the application of Athen. Available in a clear satin and clear matt finish Coverage: 8 to10 m2/litre, minimum 2 coats of hardwood, 3 coats on softwoods. Pack size 5L.

Blanchon Universal Maintenance Oil is a quick drying maintenance oil for ALL oiled floor regardless of make or manufacture. Maintenance oil is applied to surfaces coated with oil which have lost their natural sheen due to wear and tear as a result of scratches etc.. Supplied ready to use, apply a thin coat to a clean dry surface with a microfibre cloth, then leave to dry for twenty minutes and the room can be used when dry. Universal maintenance oil bring back that natural sheen to a lack luster floor in one quick application. A must use product for all oiled floors Available in a satin and matt finish. Pack size: 1L

Gives the floor an untreated appearance Resistant to liquids such as water, coffee, tea and red wine Gives the wood a beautiful, breathable surface IBR-certified

Metolux Two Part Wood Filler is the most popular wood filler in Britain, the No 1 choice by 90% of joinery manufacturers and associated industries, it is a high quality two part styrene free wood filler offering the user the benefits of a fast cure system. The new styrene free formulation represents a significant improvement on present wood filler performance including sanding painting and Stainability. Supplied with a hardener. Available - in 6 pre coloured blends to match your wood type = White, Pine, Light Oak, Dark Oak/Teak, Mahogany & Redwood. Easy application and exceptional performance. Stainable Super smooth Easy sanding once cured Timberfil can be machined, drilled, and accepts nails, screws and staples Timberfil can be finished with primer, paints varnishes and lacquers Suitable for internal and external use Supplied with hardener 275ml (Handy Pack) & 770ml (Workshop Pack)

For commercial areas with medium traffic Strong and resistant Rich and full appearance Low odour Indoor climate labelled

Properly maintained oiled floors look better and better as time goes by. Blanchon maintenance oil specially manufactured for the maintenance of hard waxoil, wood floor oil, and factory applied oiled wood floors. Ready to use natural complement for the maintenance of all Blanchon traditional oils, easy to apply and available in 3 colour shades:- natural, oak and white. How often you will need to use the maintenance oil will depend on when the floor starts to look dull, once or twice a year maybe depending on its use? For a simply way of keeping your wood floor looking beautiful for longer, consideration should be given to the following: Use a vacuum cleaner for routine cleaning. use Blanchon Lagoon cleaner to remove day to day marks and spot cleaning. use Blanchon Natural Soap for frequent cleaning. (replenishes the oils) After careful cleaning as described above and light sanding of local marks if necessary (with very fine sand paper) apply a thin single coat of Maintenance Oil with a cotton cloth or brush, always in the direction of the grain, taking care not to apply to thickly. The use of a polishing machine fitted with the correct pad can also be used to apply the oil. Allow to dry before using the area. Choose the right colour for your oiled wood floor: Natura l for light coloured or non stained wood, White for white or grey oiled wood floors, Oak for tropical wood or dark coloured oiled wood floors. The more frequent the maintenance oil is used the easier the maintenance becomes and your floor will look better and better as time goes by. Coverage: 25 to 35 m2 per litre. Pack size: 1L & 2.5L Oak & White. *Please note White 2.5L are discounted due to excess stock. 

Liberon High Resistance Varnish provides exceptional protection for wood floors and a superior resistance to high foot traffic. It is particularly suited to rooms that are in consistent use Available in clear satin and clear matt finish. Pack size: 2.5L

Top coat and care for Invisible Oil Cares for and maintains floors that have been treated with Invisible Oil Primer and Invisible Oil Resistant to liquids such as water, coffee, tea and red wine Gives the wood a beautiful, breathable soft feel surface IBR-certified

Can be treated with Osmo finishes after 1 hr INTERIOR USE ONLY!!! Permanently water repellent after curing Resistant to air conditions, stays elastic Easy to apply Can be sanded after curing, usually 24 hrs Based on 3mm gaps a 310ml tube will fill in excess of 30 linear metres Application temperature: +5°C to 40°C Drying time: 1hr Sizes: 310m SPECIAL OFFER PRICE! *Applicator gun not included* Can be painted or stained when cured

Improves adhesion of lacquer Especially suited for troublesome wooden floors Quick-drying Minimizes side-bonding Solvent-based

Floor cleaning mops for use with the floor cleaning kit. The green dry mop Is used dry for removing dust and loose particles from all hard floors and wall surfaces. Most floor surfaces should be dry mopped first as this will reduce the amount of damp mopping required later, as it is wiped over the surface it creates a static charge that attracts dirt to the mop, the micro fibre then ‘holds’ the dirt until the mop is washed. The dry mop should be used on floors in a figure of 8, ensuring that larger, loose particles are trapped against the face of the mop. The blue damp mop Is used damp to remove heavier soilings from all hard flooring surfaces. Damp mopping needs only to be carried out where dry mopping has failed to remove the soilings. The micro fibres work through capillary action, drawing dirt into the mop. For removing heavier soilings such as scuff marks, apply a little more wood floor cleaner and apply pressure to the mop by placing your foot on the aluminium base. This ensures the micro fibre has maximum contact. Once the mops become fully soiled they should be placed in the laundry and a clean mop be used to continue cleaning.

Metolux Timbermate is an air dried ready to use stopper and woodfiller for small holes, repairs, minor imperfections and grain filling. Based on a styrene acrylic emulsion Timbermate offers many benefits over other conventional stoppers. Water based, non flammable and solvent free. For internal or external use. Easy to sand to a smooth finish ready to accept primers, paints lacquers and varnishes. Pack size - 250 grams

Key Features Application Method: Brush or cloth. Number of Required Coats: One or two coats, followed by one coat of clear Osmo Polyx Oil for an enhanced finish. Drying Time: Recoat after approx. 24 hours. Coverage: Up to 24m² per litre per coat. Base: Oil-based. Available Sizes: 0.75L and 2.5L.

Excellent resistance and durability for public areas Extreme strength and resistance Meets the highest standards for slip resistance Light Nordic look Longer potlife due to Master Pure 2K Hardener  Fire classification according to DIN EN 13501: Bfl-s1

WOCA Natural Soap for cleaning and maintenance of oiled, waxed and natural soaped surfaces. A quality soap, which due to its nourishing properties quickly closes the pores of the wood and protects against dirt and penetration of liquids which makes this product a finish itself. Natural Soap Natural is used for darker wood types, whereas Natural Soap White is used for lighter floors. Natural Soap is also suitable for the basic treatment of lye treated floors. Also suitable for furniture, table tops and panels. Super concentrated, coverage 320-400 meters per litre diluted. 125ml natural soap with 5L of water. Available in Natural and White Pack size 1L,  2.5L & 5L Also available in a read to use handy spray bottle .

WOCA Maintenance Oil for the maintenance of all oiled wooden surfaces especially wooden floors, Available in natural and white. Maintenance Oil provides the floor with additional hard wearing properties. Choose the right colour for your oiled wood floor: Natura l for darker coloured woods, White for white or grey oiled wood floors. The more frequent the maintenance oil is used the easier the maintenance becomes and your floor will look better and better as time goes by. Simple application, by cloth or machine. Available: in Natural and white. Pack size 1L and 2.5L

A two-component water-based 100% polyurethane non yellowing lacquer. For commercial floors requiring a clear Silk-Matt or Ultra Matt finish. Also suitable for domestic use. Fast drying easy and safe to use. Excellent de-foaming and flow properties. Excellent durability. Number of coats required: 2 - 3 High traffic, high durability and fast curing speed Ready for use the next day, fully cured at 72 hours. Use Friction Floor Lacquer as a third/last coat for a non slip finish. Use SB Primer as a primer to produce an oiled look. Great product, hard to beat. Quantity discount offered on purchases of 4 or more tins. (call or email for info)