9/9

Fiddes Exterior Wood Protector 5L

Hover on image to enlarge
In stock
£21.93
(£26.32 inc VAT)
+

DESCRIPTION

Fiddes Exterior Wood Protector is a solvent based water repelling preservative sealer, that penetrates deeply into both smooth and planed rough sawn exterior timber.

Formulated to both preserve and protect, preventing surface growth of algae whilst offering high resistance to water penetration with excellent beading.

Available in a range of Clear and 4 natural colour shades that contain UV filters to resist colour fade.

Ideal for Sheds, Fences and timber joinery, however not suitable for use on decking or garden furniture or in areas subjected to high wear or footfall.

NOTES

On all new timber, coat thoroughly to seal. Longer drying periods may occur during application in cold, damp or humid conditions. 3 coats recommended on softwood. Clean applicators with Fiddes White Spirit

Delivery (Free UK Mainland for orders of £60 and over)
Mainland UK postage rates
Order Value Below £60    £60 & Over
UK 2-3 Working Days    £5.50         FREE
Next Working Day    £7.50         £3.50
Pre 12 Midday    £10.20         £8.20
Pre 10:30am    £13.50         £11.50
Saturday    £21.50         £17.00

Click here for full postage details
We also offer a click and collect service for those who would like to order online and collect from our store here in Bidford-upon-Avon. Please choose click and collect at the checkout.
Buy from the Best!
Social Media
Our Wood Finishing Blog
Clearance Items

PREPARATION
Ensure all surfaces are clean, dry, and free from any previous finish.

Remove any fungal growth, dirt or moss on old wood prior to application

Sand the substrate with a medium 120 grade sanding paper, removing all traces of dust.

APPLICATION
Apply in dry conditions.
Always test on a small area prior to initial application to check colour shade. Apply with brush or solvent resistant, low pressure garden sprayer, ideally in still conditions if spraying.

FIRST COAT
Stir contents thoroughly before and during use. Apply consistently using a good quality bristle or synthetic brush and lay evenly, following the direction of the grain. Leave to dry 12 hours or preferably overnight.

SECOND COAT
Apply as first coat. Leave to dry 12 hours or preferably overnight.

THIRD COAT
Apply as above. Clean applicators with White Spirit.

COVERAGE
A single application will approximately cover 6 square meters per litre, depending on density of substrate.

PACKAGING
5lt

AVAILABLE TINTS
Clear, Harvest Brown, Fern Green, Chestnut, Cedar

No posts found

Write a review