Osmo UV-Protection-Oil is a satin, clear finish for interior and exterior joinery applications (it is not however suitable for flooring application.)
It is a natural oil based and micro-porous finish, will not crack, flake, peel or blister.
Can be used as a final finish after staining and is compatible with most good quality wood stains, prolonging the renovation time significantly. However, when used as a complete finish by its self on bare timber (min 2 coats) it blocks the greying process by UV-Protection factor 12 in comparison to untreated wood. For treatment of bare exterior timbers it is highly recommended to treat the timber first with Osmo W R Basecoat.
Very high coverage at 24 sq meter per litre per coat, minimum two coat application on bare timber and one coat on previously treated timbers.
Supplied in a clear finish only and in two formats, 410 and 420 Extra, for a tinted version of the 420 Extra see Osmo UV Protection Oil Tints
Q - Whats the difference between the UV 410 & 420 extra?
A - The UV 410 contains no active biocides, where as the UV 420 extra contains active biocides and
therefore is only to be used in outdoor areas. The
added active ingredients delay or minimize the risk
of algae and fungal attack to the applied coating only not the wood. For effective protection,
two coats are to be carried out. In accordance with
the latest technical research, permanent protection
against algae and fungal attack can not be provided.
Extra indicates the product contains active ingredients.
For other other coloured wood stain finishes see Osmo Natural Oil Wood stain.
Application by brush
Available in .75L and 2.5L
*FREE BRUSH PACK Worth £4.60+VAT! - (Offer on 2.5L only. Pack consists of 1x1" / 1x1.5" 1x2" - Offer not to be used with any other offer and only 1 free brush pack per order - SUBJECT TO STOCK!)
For further information on exterior wood care and treatments, see our guides in the blog tab at the top of this page