Woca Master XP-2K Lacquer
Mainland UK postage rates
|Order Value||Below £60||£60 & Over|
|UK 2-5 Working Days||£5.50||FREE|
|Next Working Day||£7.50||£3.50|
|Pre 12 Midday||£10.20||£8.20|
Click here for full postage details
We also offer a click and collect service for those who would like to order online and collect from our store here in Bidford-upon-Avon. Please select click and collect at the checkout for this service.
Established in 1996 and with over 30 years of experience, we are the industry experts in our field. Not only do we sell amazing products, we also use them, allowing us to offer expert advice unrivalled by any other company.
If you're unsure of anything or need any advice, simply give us a call on 01789 778628, or use our online chat on the bottom right hand side of the screen.
If you haven't already, check out our Facebook page to keep up to date with news, offers, blog posts and photos of jobs we have carried out
Just click on the facebook link below!
We are also on Instagram and Twitter. Just serach for AGWoodcare!
Master XP-2K Lacquer is a water-based, two-component floor lacquer remarkable for its extremely high resistance to black heel marks, scratches and stains. Its superior performance is perfectly suited for high traffic public areas, such as canteens and stairs, as its extreme protection and resistance make the floors easy to clean and maintain. The wood is left with a rich and full appearance, due to the high solids content.
It is important that both wood and lacquer have a temperature of min. 15°C (preferably around 20°C) and air humidity of approx. 50%. Make sure that the room is well-ventilated for optimal evaporation and drying time. For the final sanding to bare wood, use grit 100-120 sandpaper or sanding pad. Vacuum thoroughly and wipe the floor down afterwards, using a tightly-wrung water-soaked mop/cloth. The floor must be completely dry before priming. When priming, use WOCA Master Base Primer for newly sanded wood to reduce side bonding. Alternatively, try WOCA Master Multi Primer for exotic wood species or old wood previously treated with oil or wax.
1 Apply the primer. When dry, mix WOCA Master Classic 2K Hardener with the lacquer and shake thoroughly before use. Leave the mixture to stand for ten minutes before use, to allow the hardener to activate.
2 A coat of Master XP-2K Lacquer should be applied undiluted, using a brush or roller. Leave the surface to dry until next day.
3 Sand the surface with grit 120-200 and vacuum clean the surface thoroughly.
4 Apply the final coat of Master XP-2K Lacquer with hardener (freshly mixed).
The freshly-lacquered floor is suitable for cautious use after approx. 5-6 hours. Do not place furniture etc. on the floor until at least 24 hours after the final coat of lacquer. The floor will be ready for normal use after approx. 5 days, after which rugs etc. can be placed on the floor.
No posts found