Eco Wood Treatment (Exterior)

Impra Profilan Opac a satin finish water based paint with excellent weather resistance and high covering capacity, offers the professional and DIYers a block-resistant weather resistant paint with no active ingredients but great covering properties. Ideal for all interior and exterior wooden surfaces, easy to apply satin finish and available in a range of timeless classic shades, we can also colour match to over 25000 shades, including BS, RAL, NCS and other popular colours. After appropriate treatment can also be used for walls, concrete, plaster, hard PVC zinc and galvanised steel A satin finish, quick drying paint, odourless and technologically superior to anything currently available on the market, durability too exceeds anything previously available giving an extended maintenance cycle. *PLEASE NOTE - IF A CUSTOM COLOUR IS REQUIRED, STATE YOUR COLOUR CODE(S) IN THE COMMENTS BOX BEFORE YOU PAY FOR YOUR ORDER, ALTERNATIVELY YOU CAN EMAIL US THE REQUIRED COLOUR CODE(S) TO email@agwoodcare.co.uk For further information on exterior wood care and treatments, see our guides in the blog tab at the top of this page.

Impra Profilan Prevent is a waterborne, colourless preservative with biocidal components. Protects against bluestain, fungal decay and insect attack. Part of the Profilan eco friendly product range. For all exterior timber especially untreated softwoods. Protects wood in the open (not in ground contact) against insects, bluestain and fungal decay. After treatment with Profilan Prevent apply Profilan Fina (base coat) and then Profilan Top Coat or any good quality wood stains or paints which improve the resistance to weather. Available in 0.75L and 2.5L For further information on exterior wood care and treatments, see our guides in the blog tab at the top of this page.

Rustins Advanced Wood Preserver is a dual purpose fungicide insecticide. A low odour, non-flammable product based on micro-emulsion nanotechnology. The ultra-fine particle size allows deep penetration of the preserver to take place so the performance of the product is much greater than standard wood preservation products. It is water based quick drying preservative that can be applied to wet or dry timbers. Most preservative available are spirit based and will not provide adaquate penetration on damp timbers and all wood rotting fungi are caused by moisture ingress. Ideal for smooth or rough interior & exterior timber including fences, sheds, garden timber structures and more. For use against wood boring insects and wood rotting fungi within domestic, commercial, institutional and industrial premises. Coverage- 3 - 4 sq mtrs per coat (depending on the porosity of the timber Available in Clear only in 1L and 5L for coloured preservatives see Rustin's Wood Protector For further information on exterior wood care and treatments, see our guides in the blog tab at the top of this page.

LONG LASTING END GRAIN PROTECTION FROM ROT, FUNGI & BLUE STAIN. Specially formulated for the treatment of vulnerable exposed end grain. Protects against fungal decay such as wet rot, wood discolouring fungus and wood boring insect attack. Penetrates strongly into end grain wood providing a water repellent finish. Contains resins and oils to give a long lasting effect. Protects vulnerable exposed end grain Specially formulated to deeply penetrate and protect cuts and notches in cladding Ideal for cladding & other cut pressure treated timbers Drying time: 12hrs Application: brush Coverage:  180ml/m 2 Activite ingredients:  Tebuconazole, IPBC and Permethrin. Colour: Green SIZE - 1L

Impra Profilan Fina is a low build base coat/primer, matt finish, water thinnable, wood stain without active biocides for new or old bare timber. designed to be overcoated with Impra profilan Top Coat. Odourless and technologically superior to anything currently available on the market . Enhances the natural beauty of the wood, light resistant, weather resistant, water repellent. (Colourless does not give U V protections, do not treat timbers exposed to the weather with colourless) For all kinds of woods used indoors and out-doors, for untreated woods used out-doors and exposed to insect or fungal attack we recommend a pre treatment with a biocide primer such as Profilan prevent or clear wood preservative . Dries evenly and quickly without runs or brush marks, easy to apply, water repellant, weather resistant, moisture regulating, does not peel or flake. Available : 9 colours plus colourless, Limba. Pine, Antique Oak, Light Oak, Mahogany, Walnut, Light Walnut, Chestnut, Rosewood and Colourless. (Please note: Colourless does not give UV protection) Pack size: .75L & 2.5L For further information on exterior wood care and treatments, see our guides in the blog tab at the top of this page.

Impra Profilan Secure , a special brush applied tannin blocker primer to combat bleeding of water-soluble tannins in certain wood components. Recommended as a first coat when using light or bright paints on wood either indoors or outdoors. When applying a water based paint system to timbers with a high tannin contents Oak, Idigbo, Hemlock etc tannins within the timber will migrate to the surface discolouring the paint colour. Profilan Secure will prevent this migration ensuring the paint finish will remain its true colour. A two coat application for full protection, plus 1 -2 coats of Profilan Opaq for a true microporous environmental friendly paint system producing a long service life, technologically superior to anthing currently on the market Impra Profilan Secure is a White, water thinnable, micro-porous quick drying primer, not for use on its own. Available in 0.75L and 2.5L For further information on exterior wood care and treatments, see our guides in the blog tab at the top of this page.

CLEARANCE SALE!!! Discount offered on certain colours whilst stocks last. Please note that some of the tins have marks, slight corrosion and faded labels etc due to storage. The contents are still 100% perfectly fine. Impra Profilan Top coat is a microporous top coat wood stain, suitable for hard and soft woods, interior and exterior applications, produces a satin finish and offers very long lasting protection, moisture regulating and age resistant, use Impra Profilan Base Coat (Fina) as a primer/first coat on new bare timber. This is without doubt the best water based wood stain available today. Impra Profilan Top Coat contains no biocides, is totally environmentally friendly. Ideal for long term protection of windows, doors, conservatories, fascias, and all other interior and exterior timber structures which needs to maintain its dimensions. Impra Profilan is ideal as a finishing coat on Profilan Fina, available in 9 colours plus colourless- Limba, Light Oak, Antique Oak, Pine, Chestnut, Light Walnut, Walnut, Mahogany, Rosewood and Colourless Please Note - Colourless does not provide UV protection and is unsuitable for exterior timbers exposed to the weather. For further information on exterior wood care and treatments, see our guides in the blog tab at the top of this page.

Woca Exterior Wood Oil is a superior quality advanced formula WATER-BASED protective sealer specially designed to protect and beautify outdoor wood components, providing a tough wear resistant coating.. Woca Exterior Wood Oil for the treatment and maintenance of new and previously oiled wood surfaces outdoors. Provides a hard wearing surface, prevents mould and fungus makes it ideal for windows, doors, decking, garden furniture and cladding etc. The one great advantage of this product is its use on hardwoods, most waterbased products are not suitable for hardwoods. Exterior Wood Oil is to be used outdoor for basic treatment and maintenance of new and previously oiled wood surfaces. Provides a strong water- and dirt-repellent surface. Enhances the natural colour and grain of the wood. Fast drying. All varieties have UV protection 2 Coats minimum Available in .75L and 2.5L For further information on exterior wood care and treatments, see our guides in the blog tab at the top of this page.

Free delivery with Royal Mail on all of our Village Green Wood Stains! (UK Locations only!) A concentrated wood stain to be mixed with water Premium quality, non-toxic, odour free 100% chemical solvent free and 99.8% VOC free Use as a standalone product or finish by sealing the stain with wax, oil, lacquer or varnish Coverage = 7 - 15 square metres per litre of diluted mixture, depending on the moisture content and porosity of the wood Available in 30 beautiful shades Bottle Size = 500ml, 1L & 5L Also available in ready to use form.  Click here