The Supreme Wax range exhibits significant advantages over many traditional toluene based wax polishes.
Supreme Wax is virtually odour free, easy to apply and, once buffed to the desired sheen level, provides a depth of finish that revives and protects any original patina.
Sand the wooden substrate in stages, working with a medium sandpaper (120 grit), through to a medium / fine grade (180 - 220 grit).
Always sand in the direction of the grain pattern where possible, ensuring the removal of any blemishes and glue residue prior to the application of Fiddes Supreme Wax. Take care to remove all traces of sanding dust and test the chosen Fiddes Supreme Wax shade on a similar substrate to verify the colour.
A coat of
Shellac Sealer is recommended on open grained woods prior to application.
If old grubby previous coats of wax require removing before the application of a fresh coat of wax, use
Liberon Wax & Polish remover first and then apply the wax.
To obtain a uniform colour, always wipe evenly, blending the Supreme wax over the whole surface area by exerting a small degree of pressure when applying by hand. Take care to lightly remove any excess Wax immediately with a separate, clean absorbent cloth, again following the direction of the grain pattern.
The application of additional coats will deepen the existing colour/ shade and significantly enhance the resulting sheen level.
Application: By cloth or brush.
Coverage:- 16 sq mtrs per litre per coat.
Pack size:- 400ml & 5L.
Remember, preparation is all important and without the correct preparation you will not achieve the desired effect.
safety data sheet (Fiddes-Supreme-Wax-Polish-MSDS-1.pdf, 201 Kb) [Download]