ProBor 50 Injection Paste
ProBor 50 is a ready-for-use wood preservative paste based on boron, a naturally occurring mineral with a long history of use. It is supplied in a 400ml cartridge for use with a standard mastic gun. ProBor 50 is designed to be injected into timber or masonry. It can also be applied to the surface of timber, although it should be noted that a white deposit will be left.
ProBor 50 is commonly used as a wood preservative when treating large dimension timbers. It is injected into timber via pre-drilled holes, thus ensuring complete distribution of the active ingredient deep within the wood. In general 10mm holes spaced no more than 150mm apart are recommended. The number of holes should be adjusted to give a product loading of 5.9 litres per cubic metre.
Other common areas of application include the treatment of joist ends and wooden window frames.
ProBor 50 is ideal for use as a masonry sterilant. Because of its highly concentrated formulation high levels of active ingredient can be injected into masonry without introducing large volumes of water. This is of enormous benefit when treating dry rot.
Supplied in 400ml cartridges
**Please note Mastic Gun is NOT included
For further information and application methods, health and the environment see the technical data sheet in the Attachments Tab.
No posts found