Fiddes Black Polish
— or —
Metres
Feet
This product covers 8.000 sqm per Litre
Fiddes Black Polish, traditionally used to create a black or ebonised finish, as with all french polish a well sealed surface is required then stain the wood with black wood dye/stain. Apply thin coats of black polish using a polishing mop or rubber, after the first two coats allow to dry fully then, rub down with 0000 gauge wire wool or 400 grit sand paper. Apply further coats of black polish building up the sheen, rubbing down between each coat. For a high gloss finish allow to dry fully for 7 to 10 days then burnish with Liberon Burnishing cream of Fiddes vita shine For maximum effect, little or no oil should be used when applying with a rubber. Produces a high gloss, black coating with an exceptional depth of colour and sheen.
Preparation is as always extremely important and special attention is recommended to achieve the desired finish. (See our guide on preparation in the tab below.)
Ensure all areas to be coated are free from grease and blemishes prior to application.
Application: by Polishers Mop or rubber.
Drying time: approx 20-30 minutes.
Coverage: approx 8 sq meters per litre, the number of coats required will depend on the type of timber and finish required, minimum 3 coats but can be as high as 6 coats.
NB. Always finish with a coat of Fiddes Supreme Wax Polish or MellowWaxPolish to further protect and enhance the natural beauty of your wood.
Pack size 1L, 2.5L, 5L
For further information and application methods, health and the environment, see the technical data sheet in the attachment tab above..
No posts found