Junckers Friction Floor Lacquer (formerly High Performance Friction)
- Please note this product is intended to be used as an anti-slip top coat for use with Junckers HT700
- Junckers Friction floor lacquer is a low odour, hard-wearing 2 part water-based polyurethane lacquer for pre treated wooden floors in areas where a high level of slip resistance is required.
- Junckers Friction floor lacquer has a textured surface and is suitable, where sweat, beer spillage etc. can make the floor slippery.
- Tested to BS 5796-2 and has a low potential for slip under wet conditions.
- Junckers Friction floor lacquer should only be used as the final coat in a system.
- Gloss level: Ultra Matt (10%),
- Coverage: Approx. 10-12 m2/litre
- Package size: 4.5lt + 450ml hardner.
- Application by brush, roller or spray.
- Touch dry after 3 hours, light traffic at 8 hours, full resistance at 3 days
- For full Slip Resistancy report please see Attachments.
For further information and application methods, health and the environment, see the technical data sheets in the Attachments Tab.
No posts found