Home/Wooden Flooring/Wood Floor Lacquers and Varnishes/Junckers SB Primer 5L (formerly BasePrime)

Junckers SB Primer 5L (formerly BasePrime)

Enter width:

Enter length:

— or —

Enter total area:

Metres

Feet

This product covers 10.000 sqm per Litre

For one coat this requires:

Write a review

CODE: JUN-BASEPRIME

£63²²

(£75⁸⁶ inc VAT)

In stock

+ −

A solvent based quick drying primer for all untreated floors prior to application of all Junckers lacquers.
Ideally suited for exotic woods and where water based primers have poor adhesion.
Dries to a clear finish in 15 minutes.
On light coloured timbers will give a warm honey tone..
Application by brush or roller, one coat required.
Junckers SB Primer does not raise the grain so enables the applicator / fitter a quick turn around.
One coat of base prime followed by two coats of Junckers HT700 or two coats of Junckers MT500
Coverage:- 10 sq mtrs per litre
Available in 5 litre.

Delivery (Free UK Mainland for orders of £60 and over)

Mainland UK postage rates

Order Value	Below £60	£60 & Over
Royal Mail 2nd Class (2-5 Working Days)	£3.55	N/A
Royal Mail 1st Class (1-2 Working Days)	£4.65	N/A
Economy Courier (2-5 Working Days)	£6.50	FREE
Express Courier (Next Working Day)	£7.90	£2.90
Express 12 Noon Next Working Day	£10.95	£5.95
Express 10AM Next Working Day	£13.65	£8.65
Saturday Delivery	£21.35	£16.35

Cut-off point for next working day is 2:30pm

Additional charges may apply for London Congestion Charge Zone

Click here for full postage details

We also offer a click and collect service for those who would like to order online and collect from our store here in Bidford-upon-Avon. Please select click and collect at the checkout for this service.

Buy from the Best!

Social Media

Our Wood Finishing Blog

Clearance Items

Description
Attachments
Reviews

Junckers SB Primer is a quick drying, solvent based single pack primer for all untreated floors prior to application of all Junckers lacquers. Ideally suited for exotic woods where water based primers have poor adhesion,.

Junckers SB Primer should only be use as the sealing coat/1st coat. The surface should be clean and dust free with any previous coating completely removed, sanding should be finished with 120 grit before applying SB Primer.

If you are in any doubt about the condition of an old sanded floor use Junckers SB Primer everytime.

Dries in 15 minutes and does not raise the grain.

Available in 5L

Data Sheet (JUNCKERS_BASE_PRIME_data.pdf, 34 Kb) [Download]

Health & Safety Sheet (Junckers_BasePrime_EN_1.0.pdf, 197 Kb) [Download]

No posts found

Have you used the product?

Tell us something about it and help others to make the right decision

Write a review