Fiddes Hard Wax Oil (clear & tints)
Preparation: Ensure all surfaces are clean, dry, and free from any previous finish. Sand the substrate with a fine 150 grade Sandpaper or sanding disk, removing all traces of dust.
Application: Ensure all areas to be coated are extremely well ventilated during and after application.
Always test on a small area prior to initial application. No primer required. Maximum 2 coats recommended. Apply at room temperature.
Fiddes Hard Wax Oil is formulated for application directly, and does not require thinning.
When the surface area is completely dry, a light buff will further enhance the sheen level.
For further information and application methods, health and the environment, see the technical data sheets in the attachment tab above.