Fiddes Hard Wax Oil (clear & tints)
— or —
Metres
Feet
This product covers 24.000 sqm per Litre
Preparation: Ensure all surfaces are clean, dry, and free from any previous finish. Sand the substrate with a fine 150 grade Sandpaper or sanding disk, removing all traces of dust.
Application: Ensure all areas to be coated are extremely well ventilated during and after application.
Always test on a small area prior to initial application. No primer required. Maximum 2 coats recommended. Apply at room temperature.
Fiddes Hard Wax Oil is formulated for application directly, and does not require thinning.
First Coat - Stir contents thoroughly before and during use, and apply in a warm, well ventilated room.
Apply thin coats only using a good quality brush or cloth, and lay evenly, following the direction of the grain. Remove any surplus material immediately with a cloth, carefully checking all areas for any excess application. Leave to dry for 4-6 hours in warm, well ventilated conditions.
Second Coat - Apply as first coat, thinly, allowing good ventilation. Leave to dry 4-6 hours in warm, dry well ventilated conditions. Clean applicator with White Spirit.
When the surface area is completely dry, a light buff will further enhance the sheen level.
For further information and application methods, health and the environment, see the technical data sheets in the attachment tab above.