Rustins Danish Oil
— or —
Metres
Feet
This product covers 14.000 sqm per Litre
Rustin's Danish oil is suitable for all types of timbers. It differs from teak oil in that it contains special ingredients which prevent it drying to a gloss. It is an easy to use wipe on finish which brings out the beauty of timber and gives a natural, open grained, soft lustrous satin matt finish.
Excellent on turned parts, penetrates deep into all types of timber, drying to a hard durable and water resistant finish.
Application: Bare wood requires 3 coats, exterior wood may require extra coats.(See further information below)
Drying Time: 4-6 hours depending on temperature and humidity. Re-coat once the previous coat is dry.
Coverage: Approximatly 14sq.m per litre per coat, depending on the absorbency of the wood. Periodic re-oiling is required to maintain the finish, Clean surfaces before re-oiling using White Spirit.
Conforms to EN71 safe for toys and food safe finish.
Pack Size: 250ml, 500ml, 1L & 2.5L
For further information and application methods, health and the environment see the technical data sheets in the attachment tabs above
Important Instructions for Exterior Wood:
Exterior wood will require re-oiling at least annually; horizontal surfaces and very exposed locations may require more frequent attention. Oak and softwoods are prone to weather staining caused by moisture activating mould spores present naturally in the wood. Extra coats will be required initially to effectively seal these timbers; especially areas of endgrain and up to 6 coats may be appropriate with regular maintenance coats.
No posts found