Interior Wood Finishes

We have a select range of interior wood finishes for all interior woodwork. Products are applied to interior woodwork for various reasons:- protection and preservation of the wood, an enhanced appearance, to provide a hard wearing easy to clean and maintain finish, child safe finish, heat resistant finish and the list goes on & on, but whatever finish you desire A G Woodcare can help you achieve your goal.

Listed below are all the products you will need for your project If you have a project in mind and it does not quite fit within our guides, then please call our technical help line.

£29.26 (£35.11 inc VAT)  
In stock
  • WOCA Driftwood Lye is a unique water based product, which gives the wood a weather-beaten patina. The product is primarily for oak wood.
  • By using this product, the wood will get a very nice 2-dimensional design.
  • Finally, the surface must be treated with one of the WOCA oils.
  • Water Based and totally VOC free
  • Coverage: 8-10 m2/L
  • Available: in White and Grey finish.
  • Pack size: 2.5L

£28.66 (£34.39 inc VAT)  
In stock
  • Woca Active Stain is water based tannin reactive stain developed to produce grey special effect colours in oak wood creating unique colours. The product is non-corrosive.
  • Gives oak a grey special effect appearance.
  • Active Stain is available in 4 colour variants of grey, Active Stain 1, 2, 3 & 4
  • Active Stain reacts with the tannic acid in the oak. The colour may vary after application depending on the concentration of tannin in the wood
  • Gives oak a grey special effect appearance
  • Requires subsequent treatment with oil or soap
  • Only for oak wood
  • Certified by IBR
  • Coverage: 8-10 m2/L
  • Pack size 100ml (sample size) and 2.5L
  • Available: Active Stain 1, 2, 3 & 4

£13.83 (£16.60 inc VAT)  
In stock
  • Woca Wortop Oil give wooden work surfaces a highly water and dirt-repellent finish.
  • Designed for untreated or previously oiled/sanded wood,
  • Available in natural and white, the Natural treatment will enhance the timber producing a mellow, golden tone, the white is designed for lighter coloured timbers, beech, ash can also be used on other timbers if a lighter shade is required
  • .Worktop Oil is an air-hardening oil that penetrates deep into the wood, leaving a tough water- and stain-resistant surface.
  • .The oil highlights the wood’s natural glow and gives the surface a natural, fresh appearance.
  • Pack size: 750ml
  • Woca Worktop Oil is FDA Approved - Food and Drug Administration approved for contact with foodstuffs (Food safe finish)
  • Also available as Work top Kit

£5.13 (£6.16 inc VAT) £9.57  
In stock

Harrell's Jecowax is a blend of waxes, including beeswax, creating a soft wax polish that can be used on all types of wood. Easy to apply wax polishes,

Harrell's Jecowax is ideal for floors, skirting and furniture either bare or sealed, buffs to an elegant sheen.

Available in 3 colours: Clear - Antique - Soft Khaki

Pack size 400gms.

Harrell's Wax Polishes a British made product and used by antique restorers around the world, used extensivly by the National Trust for use on their collection of antique furniture and for the conservation of their historic houses and castles around the UK.

£14.83 (£17.80 inc VAT)  
In stock

Blanchon Athen is a natural finish PU floor varnish for all wooden floors, can also be used on all interior joinery.

A ready-to-use single component water-based wood floor varnish Really easy to apply.

Quick drying & curing time means rapid return to use of the floor following completion. Does not change the wood colour.

High resistance to wear & tear, water & staining.

If using wood stains/Dyes use Blanchon S O Primer prior to the application of Athen.

Available in a clear satin and clear matt finish

Coverage: 8 to10 m2/litre, minimum 2 coats of hardwood, 3 coats on softwoods.

Pack size 1L & 5L.

£16.57 (£19.88 inc VAT)  
In stock

To create White colours on tannic woods without colour bleeding, for the White Concept® System, essential prior to using Aquateinte™ 2K white and pearl grey.

Prim'Aquateinte™ is a primer for use on tannic woods (oak, chestnut, etc) prior to an application of Aquateinte2K white or pearl grey of White Concept® System. It blocks the tannins, preventing the original Aquateinte2K stain from turning yellow or green when overcoated directly with a water-based finish.

Available in 1L & 5L

10 m2 per litre per coat.

£6.80 (£8.16 inc VAT) £9.95  
In stock

Unique antibacterial, antifungal varnish for use in environments where hygiene and durability are key

A high performance, tough acrylic resin based anti-bacterial and anti-fungal varnish for use in environments where hygiene and durability are key.
Silver has been used for centuries for its natural sterilising properties. The innovative SteriTouch® carrier mechanisms allow this antimicrobial effect to be harnessed and delivered in an efficient and controlled manner. SteriTouch® is there to stay. It won’t lose efficiency due to leaching or migration and is unaffected by scratches and abrasion.

ideal for
• paintwork • wallpaper • plaster • fabric • interior wood • most other interior surfaces

unique qualities
• superior microbial and chemical resistance• non-leaching anti-microbial agents• protects against water, stains and mild abrasion • withstands cleaning
• lifelong anti-microbial properties • brush applied • easy to repair • long-lasting

£8.73 (£10.48 inc VAT)  
In stock

hard and durable, crystal clear, cross linked protection - fast drying, it protects a wide range of surfaces

This high quality cross linked lacquer dries to a hard, crystal clear satin or high gloss film, with extremely good sanding properties and is specially formulated to bond to a wide range of surfaces - it can also be used as a multi surface primer.

ideal for
• metal surfaces • laminate • timber surfaces • tile • ceramic • glass • plastics

unique qualities

• interior • very hard and durable finish • 1-2 hour drying time • water resistant • stain resistant • heat resistant • water wash up

£6.80 (£8.16 inc VAT) £8.09  
In stock

An extremely pale varnish that reduces yellowing and preserves the natural appearance of the wood

A unique oil based varnish made with selected resins and oils to achieve an extremely pale colour.
An extremely durable, high quality coating with a satin finish that dries to a stain resistant film. Preserves the natural appearance of the wood.
Dramatically reduces yellowing characteristics compared with Polyurethane Varnishes.

Ideal for:
  • hardwood and softwood doors
  • kitchen worktops and cabinets
  • bar tops
  • tabletops
  • counters
  • bookshelves
  • wood panelling
  • protection of oil-based glazing or broken colour work

Unique qualities:

  • extra low yellowing
  • non reflective
  • easy to apply
  • highly heat and water resistant

£20.97 (£25.16 inc VAT)  
In stock

ultra tough crystal clear protection for interior floors

This is the hardest of all 'one pack' varnishes. An ultra hard, high quality coating with a satin or dead flat finish that dries to a crystal clear film with extremely good sanding properties allowing a very high quality of finish to be obtained. Formulatated for floors and areas of high wear.
When using dead flat finish, if a very high level of durability and stain resistance is required, apply one or two coats of Floor Varnish Satin Finish followed by one or two coats of Floor Varnish Dead Flat Finish.

ideal for
• wooden floors • cork tiles • stone • slate • brick • quarry tiles • wooden worktops

unique qualities
• dries fast cures fast highly heat and water resistant • ultra hard • clear as glass • good resistance to alcohol, stains and chemicals • resistant to heel marks • sands to a high-grade finish • easy to apply

• wash brushes in water

£10.34 (£12.41 inc VAT)  
In stock

highly durable, fast drying, fast 16 hour curing, crystal clear protection

An ultra hard, high quality varnish with a satin or dead flat finish that dries to a crystal clear film for interior surfaces requiring a high level of protection such as working surfaces and areas of
high wear.

ideal for
• doors • wooden worktops • tabletops • furniture • kitchen cabinets • wood panelling

unique qualities

• interior • very fast drying • water resistant • heat resistant • abrasion resistant • water wash up

£9.94 (£11.93 inc VAT)  
In stock

a unique traditional wax-like, brush on, protective varnish, for a high performance satin or non reflective finish

Combines the silky feel of wax with the durability of a varnish. Reminiscent of the traditional feel of lovingly preserved furniture. Retains the natural appearance of the wood.

available finishes:
Satin for depth and a soft sheen, dead flat for a completely shine free surface, coloured satin to transform wood with subtle, even shades. For a completely non reflective finish, apply clear dead flat over coloured satin.

ideal for
• bookshelves • new wood • furniture • doors • staircases • wood and MDF • fire surrounds • kitchen cabinets

unique qualities

• interior • 1-2 hours drying time • water resistant • heat resistant • abrasion resistant • microporous • water wash up

£19.71 (£23.65 inc VAT)  
In stock

Morrells Heat Resistant Pale Polish,

  • modified polish with improved hardness, heat and water resistance
  • Exhibits excellent clarity
  • Supplied ready for use
  • Easy application
  • Available in 1L or 5L

£22.57 (£27.08 inc VAT)  
In stock

Intensive colours allow the wood's natural grain and character to remain visible after the first coat, however these characteristics become hidden after the second coat. For high tread surfaces such as flooring - only one coat is recommended, followed by a clear coat of Polyx®-Oil. This is to ensure the colour is also protected from wear. For furniture, joinery and children's toys - a second coat can be applied for an opaque colour tone, hiding the wood's character.

£29.16 (£34.99 inc VAT)  
In stock

Blanchon Opaque Coloured Lacquer for parquets, wood floors, stairs / Masks the support in 3 coats / Brings out the depth and grain of the wood

Water-Based Polyurethane / Highly resistant to abrasion, impacts and scratches 6 out of 10 for hardness
Air Protect®: Blocks up to 80% of formalin emissions from the floor.
Ready to use: single component
Odourless / High build / Easy to apply
For all types of wood

Quick return to use of the work area: 24 hours after the final coat

Available in Black, White, Light Grey, Linen

Requires 3 coats

Pack size1L and 5L

£9.13 (£10.96 inc VAT)  
In stock



SIZE: 300ml

£12.74 (£15.29 inc VAT)  
In stock

Sprayshine is a colourless wax in spray containing turpentine and beeswax to dust and shine all types of finished woodwork and furniture.

Sprayshine nourishes, protects and shines. It leaves no deposit or white film!

Available in 500ml aerosol.


Spray at a distance of 20 or 30 cm from your furniture. Leave to stand for a few minutes, then shine with Polishing cotton or a Polishing brush.


£14.07 (£16.88 inc VAT)  
In stock

French polish restorer restores worn and bleached “French” polish.

French polish restorer polishes out fine scratches and marks.
It restores the original shine and deposits a layer of shellac.

Available in 500 ml can


  1. Soak a piece of Polishing cotton in French polish restorer and gradually rub onto the surface using circular movements.
  2. When the Polishing cotton sticks to the surface, the shine and depth appears. It is this generated heat that permits the varnish and shellac contained in the French polish restorer to blend.
  3. Keep rubbing until the cloth moves freely over the surface, then quickly remove the Polishing cotton. Do not touch the surface until 1 or 2 hours later.

£12.65 (£15.18 inc VAT)  
In stock

French polish reviver cleans and restores shine of antique or modern varnished furniture.

French polish reviver is essential after French polishing to remove traces of grease left by French polish restorer.

It enables maintenance and cleaning of varnished kitchen furniture.


Easy shines, Removes micro-scratches, Renovates


Soak a piece of polishing cotton in French polish reviver and gradually rub onto the surface using circular movements.

Do not stop rubbing until the surface has a high shine.

Available in 450ml can.


£9.66 (£11.59 inc VAT)  
In stock

ideal for

• internal wood • fabric • paintwork • wallpaper (not vinyl) • plaster • murals • mouldings

unique qualities

• interior and exterior • quick drying • water resistant • stain resistant • abrasion resistant • microporous • UV filter protection

£38.73 (£46.48 inc VAT)  
In stock

The first 1k oil that works like a 2k

  • ONE COAT ONLY! This product only requires one coat which equates to the lowest cost per Square Metre compared to other oils in today's market.
  • Diamond Oil Active is for those who appreciate an incredibly high level of quality when oiling their wooden floors.
  • This exclusive, single-component, low-odour, extremely hard-wearing floor oil is made from the absolutely finest quality materials.
  • It is very easy to work with and assures minimal waste.
  • Diamond Oil Active’s unique hyper cross linking technology will give your wooden floor a comfortable, non-slip surface that is extremely water repellent and easy to clean and maintain.
  • The oil has a dry matter content of >90% and is suitable for machine-application when oiling untreated, new or newly-sanded wooden floors in all species of wood.
  • Resistant to liquids, scratches and marks.
  • Gives the wood a beautiful, breathable surface
  • Easy maintenance, Just use Woca natural soap.
  • Coverage:- 20 -25 sq mtr per litre
  • Available in Natural, White and Extra White
  • Supplied in 1L & 2.5L

£8.60 (£10.32 inc VAT)  
In stock
  • Gives good resistance to finger and water marks
  • Ideal for small surfaces
  • Feeds, polishes and helps prevent wood drying out
  • Highly lustrous and hard wearing
  • Helps cover marks and scratches
  • Coverage - 10-12 m2
  • Interior Use
  • Drying time - 20min minimum
  • Application - Brush, Cloth or Steel Wool
  • Tool Cleaning - Water

£10.03 (£12.04 inc VAT)  
In stock

Willow Tree Interior wood stain

  • A ready to use superior interior wood stain formulated using the latest and best micronized water soluble pigments that impart a beautiful colour to all interior wood work, made with superior binders and flow additives colours are formulated to be 100% chemical solvent VOC free'
  • Our interior wood stain colours penetrate deep into the wood and binds to the wood fibres. The semi-transparent qualities enhance the wood grain, leaving a beautiful natural finish.
  • Unique qualities of this product allow you to apply multiple coats creating a deeper depth of colour without lifting the previous applied coats. Try using grey stains as an undertone allowing to dry, and then applying a second coat of a different colour, such as our Oxford Brown or Tudor. You will be amazed by the depth that this technique can add to your finish.
  • Odour free, easy to use and dries fast.
  • Finish by sealing the stain with wax, oil, lacquer or varnish.
  • Ready To Use on softwoods and most hardwoods, Interior wood stain colours can be used on all interior woodwork.
  • Coverage = 7 and 10 square metres per litre, depending on the moisture content and porosity of the wood.
  • Available in = 20 Unique colours (See below)
  • Pack Size = 500ml & 1L

£62.25 (£74.70 inc VAT)  
In stock

Can be used alone to provide a clear finish or applied over Osmo Polyx Oil Tints, Osmo Wood Wax Finish Transparent to provide various colour combinations

  • Available in a Satin (3032) finish
  • Supplied in 3L
  • Application - By brush, cloth, scraper
  • Coverage - 24 sq mtr per litre per coat

*FREE 3" PAINT BRUSH - (Offer on 2.5L & 3L only. Offer not to be used with any other offer and only 1 free brush per order - SUBJECT TO STOCK!)

1 2 3 4 5 6 7