Fiddes Supreme Wax

In stock
1024
£8.32
(£9.98 inc VAT)
FREE DELIVERY ON ALL ORDERS OVER £50
(UK MAINLAND)

Fiddes Supreme Wax Polish is a Toluene Free, low aromatic quick drying furniture wax polish. Formulated to offer excellent results on bare or sealed wood. Fiddes Supreme Wax Polish contains a unique, environmentally friendly blend of waxes that naturally enhances the beauty of your wood. Recommended for use on furniture, doors, floors cabinet work and panelling.

Available in seven carefully selected shades,

Light:- a clear wax which maintains the existing, natural colour of the wood.

Stripped Pine:- Ideal for recently stripped or restored pine furniture and doors.

Rugger Brown:- Ideal for Oak, Elm, Walnut or Pine for a slightly darker shade.

Forest Brown:- for any type of wood when a slightly warmer tone is required.

Antique Brown:- produces a light honey brown shade for all types of wood.

Cherry:- Ideal for use on mahogany, rosewood or any timber for a rich warm finish.

Jacobean:- for use on very dark antique furniture or any timber producing a dark tone.


Application: By cloth or brush, Coverage:- 16 sq mtrs per litre per coat


Pack size:- 400ml & 5L


Perfect choice for CHALKY PAINT surfaces!!!!

+

The Supreme Wax range exhibits significant advantages over many traditional toluene based wax polishes.

Supreme Wax is virtually odour free, easy to apply, and once buffed to the desired sheen level, provides a depth of finish that revives and protects any original patina.

Sand the wooden substrate in stages, working with a medium sandpaper(120 grit), through to a medium / fine grade (180 �220 grit).

Always sand in the direction of the grain pattern where possible, ensuring the removal of any blemishes and glue residue prior to the application of Fiddes Supreme Wax. Take care to remove all traces of sanding dust and test the chosen Fiddes Supreme Wax shade on a similar substrate to verify the colour.
A coat of Shellac Sealer is recommended on open grained woods prior to application.
If old grubby previous coats of wax require removing before the application of a fresh coat of wax, use Liberon Wax & Polish remover first then apply the wax.
Application: Take a clean cotton cloth or 0000 gauge steel wooland apply in the direction of the wood grain where possible.
To obtain a uniform colour, always wipe evenly, blending the Supreme wax over the whole surface area by exerting a small degree of pressure when applying by hand. Take care to lightly remove any excess Wax immediately with a separate, clean absorbent cloth, again following the direction of the grain pattern.
Leave to dry for around 3 minutes, and buff to finish with a soft cloth or wax polishing brush.

The application of additional coats will deepen the existing colour/ shade and significantly enhance the resulting sheen level.

Remember, preparation is all important and with-out the correct preparation you will not achieve the desired effect.


safety data sheet (Fiddes-Supreme-Wax-Polish-MSDS-1.pdf, 201 Kb) [Download]

No posts found

Write a review

Coverage Calculator

Related products

Customers also bought