9/9

Timberbond AGW PU D4 Gel , 310ml

TIMBERBOND
Hover on image to enlarge
In stock
£5.76
(£6.91 inc VAT)
+

Timberbond  AGW PU D4 Gel , 310ml has been formulated for high performance water-resistant bonds between a wide range of materials.

This product will save you time and money; The Speed of set is approx. is 10mins.

Delivery (Free UK Mainland for orders of £60 and over)

Mainland UK postage rates

Order Value Below £60    £60 & Over
UK 2-5 Working Days    £5.50         FREE
Next Working Day    £7.50         £3.50
Pre 12 Midday    £10.20         £8.20
Pre 10am    £13.50         £11.50
Saturday    £21.50         £17.00


Click here for full postage details

We also offer a click and collect service for those who would like to order online and collect from our store here in Bidford-upon-Avon. Please select click and collect at the checkout for this service.

Buy from the Best!
Social Media
Our Wood Finishing Blog
Clearance Items
Description

Timberbond  AGW PU D4 Gel , 310ml has been formulated for high performance water-resistant bonds between a wide range of materials.

The thixotropic nature of the gel prevents slumping and gives a level of gap filling to the bond. Timberbond  AGW PU D4 Gel has excellent adhesion to wood, chipboard, polyurethane, mineral wool, concrete, stone, bricks, gypsum boards and all traditional porous substrates and van be used in a wide range of bonding applications. Timberbond  AGW PU D4 Gel is ideal for all types of wood bonding and joinery, bonding wooden constructions, boats, jointing sandwich panels, and insulation as well as many other applications.


100% waterproof (including sea water)

Acid and chemical resistant D4 unbreakable strength joinery & construction adhesive having thixotropic properties
Supplied in cartridges for ease of application

The speed of set is approx. 10 mins. Suitable for bonding wood, concrete, metals, ridged plastics, polystyrene etc.

PREPARATION AND APPLICATION

At least one of the surfaces to be bonded must be porous and ensure surfaces are always clamped during cure.

Firstly cut tip of the cartridge and screw on the nozzle. Cut nozzle to an angle of 45 degrees. Apply the adhesive, using a standard cartridge gun, to one of the surfaces to be bonded and assemble the bond immediately (within 5 minutes). Apply pressure to the bond, by means of a clamp. The product will foam slightly on application to fill any small gaps. Clean away any excess adhesive immediately.

Under normal conditions the gel will skin over after approximately 5 minutes and give a handleable cure within 10 minutes and final bond strength acheived in 12 hours.

HANDLING AND STORAGE

The product should be stored unopened in a dry condition at a temperature of 10 - 25°C. This will ensure the stated shelf-life of 12 months. The adhesive will have a limited life once the container is opened.

Attachments

Data Sheet (Timber_Bond_Technical_Data_Sheet.pdf, 253 Kb) [Download]

Safety Data Sheet (Timber_Bond_MSDS.pdf, 3,387 Kb) [Download]

Reviews

No posts found

Write a review