Fiddes Full Stop Stain Block H20 - Acrylic
| PREPERATION | Ensure all surfaces are clean, dry, and free from any loose paint, dust debris. Clean down and de-grease surface to remove engrained contamination such as excessive grease, wax, mould and oil that may affect adhesion, prior to application. Sand surface to remove any flaking paint or loose debris, to a smooth clean finish. |
|---|---|
| Application | Apply in dry conditions at room temperature, and stir contents thoroughly. Apply with natural or synthetic bristle brush, roller or spray. Refer to manufacturers spray equipment instructions and clean down with soap and water. Not recommended for use on ferrous metal/steel, floors or exterior decking and roofs. |
| Coverage | A single application will approximately cover 10 m2 per litre, depending on density of substrate. Touch dry in 25 minutes. Re-coat in 45 minutes at room temperature. Allow 2 hrs dry in low temperatures or over damp stains and resinous knots. Apply 2 coats on new timber. |
| THINNERS | Water |
| COATS | Single Coat |
| RECOMMENDED FOR USE ON | Interior/Exterior Wood, Dry Wall, Plaster, Paint, Varnish, Aluminium, Glass, Ceramic Tiles |
| Size | 1lt, 2.5lt, 5lt |
No posts found