Timbabuild EHB60 2-Part Epoxy Wood Filler 400ml
Overview
The Timbabuild EHB60 epoxy wood filler is a professional-grade, two-part Timbabuild epoxy resin system designed to repair and restore damaged or decayed timber. Manufactured by Chemfix, this advanced Timbabuild filler provides a strong, non-shrinking bond ideal for both structural and aesthetic restoration work.Perfect for repairing timber sections up to 60mm deep, Timbabuild EHB60 not only rebuilds wood but also helps prevent further decay. Its unique non-slump, thoxtropic formulation makes it ideal for use on large, vertical, or overhead wooden elements such as window frames, doors, beams, soffits, gutters, and fascias.
Supplied in a convenient side-by-side cartridge, the Timbabuild EHB60 epoxy resin works seamlessly with the Timbabuild extrusion gun for accurate and easy application. Once cured, it can be painted, sanded, drilled, or machined, offering exceptional versatility across timber repair and joinery applications.
Preparation
To ensure the best results when using Timbabuild EHB60 epoxy filler, follow these steps:
- Clean the surface: Make sure the timber is clean, dry, and free of dust, grease, or loose material.
- Prime with Timbabuild EWS: For optimal adhesion, apply the Timbabuild EWS primer system to the repair area before using the filler.
- Prepare the cartridge: Insert the Timbabuild EHB60 side-by-side cartridge into the Timbabuild gun and check that both components are flowing evenly.
- Temperature check: Work in the recommended temperature range of 20-35ºC for proper curing and adhesion.
Application
The Timbabuild EHB60 epoxy resin filler is easy to apply using the Timbabuild cartridge and gun system. Follow these steps for a professional finish:
- Dispense the filler: Use the Timbabuild gun to extrude the epoxy filler evenly through the static mixer nozzle.
- Apply to timber: Place the filler directly onto the prepared area, shaping as required. The thixotropic consistency prevents sagging or dripping.
- Shape and smooth: Work the filler into the desired shape before it begins to cure.
- Curing time: Allow the Timbabuild EHB60 epoxy filler to cure for approximately 4 hours at 20-35ºC. Once hardened, it can be sanded, painted, or machined as needed.
Aftercare
To maintain and extend the life of your Timbabuild EHB60 repairs, ensure that the treated area is properly finished and protected once cured by applying a suitable decorative wood coating or paint for added durability. Regularly inspect the repaired timber to confirm the ongoing integrity of the bond and address any early signs of wear. Store any unused Timbabuild EHB60 cartridges in a cool, dry environment to preserve their 24-month shelf life, and always clean tools immediately after use with water to prevent residue build-up and ensure they’re ready for the next application.
Why choose Timbabuild EHB60?
Professionals across the UK trust the Timbabuild EHB60 epoxy wood filler for high-quality, lasting timber repairs. Its non-shrinking, solvent-free formula ensures exceptional performance and safety for both interior and exterior projects.
From small-scale joinery to listed building restoration, the Timbabuild epoxy resin range offers complete timber repair solutions. Pair the Timbabuild EHB60 filler with the Timbabuild EWS Primer and Timbabuild Starter Kit for a full, professional-grade repair system.
No posts found