Interior Wood Finishes

Liberon Finishing Oil is a blend of high quality oils for use on all interior wood,. Produces a hard wearing and water resistant oil for surfaces that are in everyday use. Easy to apply and maintain, provides a satin to gloss finish. Ideal for use on work tops, kitchen tables and bathroom furniture also for turned woodwork and wooden toys. can also be applied to cork, stone and terracotta. Application by brush or cloth to a well prepared surface, allow oil to penetrate for 10 minutes then wipe of any excess and allow to dry. A minimum of 3 coats is recommended, for a more durable finish and a higher sheen apply more coats. Simple to use, provides a superb finish. Available in 250ml. 500ml. 1L and 5L

Garnet Shellac Flakes makes a dark brown french polish.

Button Shellac Flakes makes a golden brown french polish.

Chestnut Small Round Brush for easy application of waxes, pastes etc. in intricate places.

Liberon Burnishing Cream used to restore the original highly polished finish to furniture, covers superficial scratches and revives dull and tired hard finishes. Pack size: 250ml, 500ml and 1L.

Stockinette Roll is a large 800gm pack of very absorbent cloth roll used to apply wax polishes, water based and spirit based stains etc, also ideal for buffing up the wax.

Key Features Application method: Brush or lint-free cloth. Number of required coats: Minimum 3 coats for interior use, 4 coats for exterior use. Drying time: Allow each coat to penetrate for 5-10 minutes before wiping off excess and drying. Coverage: Varies based on wood type and surface. Base: Blend of pure tung oil and other natural oils. Available finishes: Soft silk sheen. Certifications: UV filters for protection against discolouration. Sizes:  Available in 250ml, 500ml, 1L, and 5L. F or further information and application methods, health and the environment see the technical data sheet in the Attachments Tab .

A concertina type spray booth Filter media, 900mm x 9mtr, efficient and long lasting.

Junckers WB Primer (Formerly PreLak) is a single-pack, fast drying water-borne primer for use with Junckers water-based floor finishes on all types of internal timber floors. Use with Junckers MT500 Floor Lacquer and HT700 Floor Lacquer floor lacquers. Prelak provides a stable surface for the application of the top coat and also prevents the timber joints from gluing together (side bonding) which prevents natural movement of the timbers and can lead to damage. Apply to a clean dry and dust free surface, only one coat required. For use on new and bare timbers Available in 5L

Fiddes Supreme Liming Wax produces a 'Limed' finish, normally associated with period oak furniture. Traditionally used on antiques but is also suitable for use on modern furniture and will enhance the natural beauty of wood while protecting it against dryness.

Liberon Black Patinating Wax creates striking effects on all types of material such as metal, wood and plaster Use to create special effects on wood, age wood and disguise repairs. Pack size: 250ml

BRIWAX SPRAY, is a new introduction to our furniture and wood care range, it is a "surface shine and spray polish" for antique reproduction finishes, especially for usage on hardwoods. Supplied in a 400ml aerosol

Harrell's Traditional Wax Polish is regarded by restorers as probably the best wax polish for the care and protection of antique and fine furniture because of the way it naturally retains the patina and enhances the beauty of the wood it is applied to. Available colours: Antique, Colourless, Khaki, Georgian Mahogany, Red Mahogany Tin size: 225g, 400g & 5Kg Harrell's Wax Polishes a British made product and used by antique restorers around the world, used extensivly by the National Trust for use on their collection of antique furniture and for the conservation of their historic houses and castles around the UK.

These bristle brushes are specially designed for polishing waxes surfaces and give a higher sheen than buffing with a cloth.

Chestnut Lemon Oil, manufactured using lemongrass oil, Lemon Oil gives a virtually matt, non-tacky finish to bare timber whilst enhancing the feel of the wood and leaving a pleasant lemon aroma. Non-oxidising and water-resistant, Lemon Oil is also ideal for finishing the inside of drawers, boxes and cabinets. Pack Size 500ml & 1L

Chestnut Aerosol Acrylic Gloss Lacquer . A quick drying acrylic lacquer which combines the easy application of an aerosol with a multi-purpose hard wearing coating in gloss a gloss finish. Does not contain CFCs. for a satin finish see Chestnut Aerosol Acrylic Satin Lacquer. Available in 400ml aerosol.

Chestnut Aerosol Acrylic satin lacquer. A quick drying acrylic lacquer which combines the easy application of an aerosol with a multi-purpose hard wearing coating in satin finish Does not contain CFCs. For a gloss finish see Chestnut Aerosol Gloss lacquer Available in 400ml aerosol

Chestnut Aerosol Acrylic Sanding Sealer. An easy to apply sanding sealer in aerosol form, modified for a very quick drying time. Available in 400ml aerosol

Chestnut Ebonising lacquer . A quick drying pigmented acrylic lacquer designed to coat most timbers to mimic the classic look of ebony in an easy to use aerosol to ensure a smooth finish. Ebonising Lacquer colours and finishes in one and is hard wearing enough to cope with most applications. This product contains no CFCs. Available in 400ml aerosol

Chestnut Aerosol Gloss Lacquer , The ever popular melamine lacquer in an aerosol for easy application, giving a hardwearing gloss finish with good heat and water resistance. Pack size: 400ml

Chestnut Woodturners Stick, A solid stick, rich in Beeswax and Carnuaba Wax for polishing on the lathe to give a high gloss finish. Uniquely shaped to allow access to awkward and intricate areas, blended for easy use. Use over Sanding Sealer.

A block of pure carnauba for use on the lathe to give a long lasting bright gloss finish. For best results use with any of Chestnut's Sanding Sealers.

The popular cellulose sanding sealer packed into an easy to use, fast drying aerosol spray form.

Mirka Abranet Abrasive Strips 70mm x 125mm for use with the Mirka hand sanding block 70mm x 125mm With Abranet, Mirka has succeeded in something where many others have previously failed – to develop a completely even sanding net. Thousands of holes provide phenomenal dust extraction. This clever structure provides many advantages. Using Abranet, dust is removed from the space between the abrasive and the sanded surface, which means that the abrasive grains are cutting the surface more efficiently, because the dust is being continuously sucked away, sanding is virtually dust-free. Keeping the abrasive and the sanding surface constantly dust-free extends the lifespan of the abrasive. Since the abrasive maintains its aggressive properties over the entire surface, sanding becomes more even and efficient, improving the quality of work. Since you can always see what is being sanded, you gain excellent control over the work to avoid over-sanding, for example. To benefit for complete dust free sanding you will also requires an extraction unit even something as simple as a vacuum cleaner and flexible hose and away you go. Another great benefit of Abranet is it will last at least 5 times longer than a standard abrasive. Available Grits from 80 to 600 grit in packs of 10 and box's of 50.