Osmo UV - Protection Oil Tints

In stock
103048
£18.18
(£21.82 inc VAT)
FREE DELIVERY ON ALL ORDERS OVER £50
(UK MAINLAND)

Osmo U V Protection Oil Tints are a range of 3 transparent, lightly pigmented natural oil based satin finish wood stains for all vertical exterior joinery components, windows, doors, carports etc. The microporous surface allows the wood to breathe and reduces swelling and shrinkage. Water-repellent surface will not crack, peel, flake or blister. Can be used as a top coat on already treated wood, Osmo UV-Protection-Oil Tints prolongs the renovation intervals significantly. As a single product application, it blocks the greying process on vertical surfaces with a UV protection factor 12 in comparison to untreated wood (when two coats are applied). The finish contains active ingredients that prevent mould, algae and fungal attack.

Without sanding, simply recoat. Easy and seamless application. Finish stays workable while coating.

Osmo UV-Protection-Oil Tints is available in, oak (425) and cedar (428) and natural (429) all in a satin finish.

Coverage = 1Litre covers 24 m2

Available in 750ml , 2.5L tins.

For further information on exterior wood care and treatments, see our guides in the blog tab at the top of this page.

+

Osmo U V Protection Oil Tints designed for the protection of all vertical wooden components,

External elements of weathering fade the natural colour of the wood to a grey patina over time. UV-Protection Oil Tints has been developed to slow this process significantly, with added pigments to 'tint' the appearance of the wood, whilst the wood's natural characteristics remain visible. Contains natural oils and enables a microporous, breathable surface which does not crack, flake, peel or blister. Water and dirt resistant, moisture regulating and reduces wood swelling and shrinkage. Ideal for windows, doors, cladding, fencing and other exterior joinery.

Available in 3 colour shades. The oak (425) will impart an oak/darkish colour, the cedar (428) will provide a reddish colour designed for new and old cladding/timbers and the natural (429) has been designed to retain the natural appearance of the lighter woods with the addition of light/whitish pigments. The Natural (429) if used on dark timbers and old rough sawn weathered wood will trap the white pigments in the grain leaving a milky white appearanca on the surface for this reason we do not recommend this product for this type of application.

For a clear coating use Osmo UV Protection Oil 410 or 420.

All the tints will high-light the grain drawing out the natural beauty of the wood, with added colour to revitalise tired timbers.

Coverage = 1Litre covers 24 m2


For further information and application methods, health and the environment see the technical data sheet in the Attachments Tab.

Health & Safety Sheet (uvprotectionoiltints_lml7-o6.pdf, 86 Kb) [Download]

Data Sheet (uvprotectionoiltints.pdf, 328 Kb) [Download]

No posts found

Write a review

Coverage Calculator

Good to know

Customers also bought