Windows

Impra Color is a spirit based micro-porous matt finish wood stain containing biocides, protecting the timber against fungal decay, blue stain and insect attack, it is highly water repellent providing long term protection.Impra Color can be used as a stand alone product on new or old bare clean timbers, will require 3-4 coats to produce a surface build for good protection. Impra Color is suitable for all soft wood and hard woods e.g. doors, windows, conservatories, beams, eaves, log cabins and any other exterior wooden structure. Available: 10 colours plus colourless - limba, Light Oak, Antique Oak, Mahogany, Walnut, Light Walnut, Chestnut, Rosewood, Pine, Fen Green and Colourless. (Colourless does not give UV protection, not to be used as a stand alone product) Coverage: 12 sq mtrs per litre (depending on porosity of timber) Application : by brush Pack size : 0.75L, 2.5L and (20L drums, available in a few colours only, ring for more details) For further information on exterior wood care and treatments, see our guides in the blog tab at the top of this page.

Impra Profilan Fina is a low build base coat/primer, matt finish, water thinnable, wood stain without active biocides for new or old bare timber. designed to be overcoated with Impra profilan Top Coat. Odourless and technologically superior to anything currently available on the market . Enhances the natural beauty of the wood, light resistant, weather resistant, water repellent. (Colourless does not give U V protections, do not treat timbers exposed to the weather with colourless) For all kinds of woods used indoors and out-doors, for untreated woods used out-doors and exposed to insect or fungal attack we recommend a pre treatment with a biocide primer such as Profilan prevent or clear wood preservative . Dries evenly and quickly without runs or brush marks, easy to apply, water repellant, weather resistant, moisture regulating, does not peel or flake. Available : 9 colours plus colourless, Limba. Pine, Antique Oak, Light Oak, Mahogany, Walnut, Light Walnut, Chestnut, Rosewood and Colourless. (Please note: Colourless does not give UV protection) Pack size: .75L & 2.5L  (please note Colourless Tin 2.5L are in fact 2.25L) For further information on exterior wood care and treatments, see our guides in the blog tab at the top of this page.

Key Features Solvent-free formula: Safe for indoor and outdoor applications with minimal VOC emissions. Thixotropic consistency: Perfect for both vertical and horizontal repairs without slumping. Precise cartridge system: Ensures a consistent 1:1 mixing ratio with every application. High strength and durability: Delivers long-lasting results and excellent impact resistance. Fast curing time: Ready for painting or sanding in just 4 hours. Versatile applications: Suitable for splicing, adhesive lamination, and large restoration projects. Non-shrink epoxy formula: Creates a strong, stable bond that won’t shrink or crack over time. Used in historic renovations: Trusted in restoration contracts for listed and heritage buildings. Easy to use and store: Simplifies application and clean-up using the Timbabuild gun system. Eco-friendly: Solvent-free, sustainable formulation for professional woodcare applications.

Impra Profilan Top coat is a microporous top coat wood stain, suitable for hard and soft woods, interior and exterior applications, produces a satin finish and offers very long lasting protection, moisture regulating and age resistant, use Impra Profilan Base Coat (Fina) as a primer/first coat on new bare timber. This is without doubt the best water based wood stain available today. Impra Profilan Top Coat contains no biocides, is totally environmentally friendly. Ideal for long term protection of windows, doors, conservatories, fascias, and all other interior and exterior timber structures which needs to maintain its dimensions. Impra Profilan is ideal as a finishing coat on Profilan Fina, available in 9 colours plus colourless- Limba, Light Oak, Antique Oak, Pine, Chestnut, Light Walnut, Walnut, Mahogany, Rosewood and Colourless Please Note - Colourless does not provide UV protection and is unsuitable for exterior timbers exposed to the weather. Discount offered on certain colours whilst stocks last. Please note that some of the tins have marks, slight corrosion and faded labels etc due to storage. The contents are still 100% perfectly fine. For further information on exterior wood care and treatments, see our guides in the blog tab at the top of this page.

Key benefits  • Solvent Free - suitable for indoors and outdoors. • Rapid Curing - For same day repairs. • Cartridge System Ensures Accurate Mixing. • High Strength & Durability. • Fast and Simple to Use, Easy to Clean and Store. • Used with the EWS primer system. • Cured and ready for painting within one hour (at 20-35ºC). • Suitable for Splicing Repairs and as an adhesive. (Lamination) • Used by Sash WIndow Specialists for “same-day” repairs. • Epoxy formulation does not shrink and gives an excellent bond. • VOC A+ 400ml Tube

• Solvent Free - suitable for indoors and outdoors • Excellent Penetration due to the Low Viscosity • Pre-measured to Volume 2:1 ratio to ensure accurate mix • High Strength & Durability • Fast and Simple to Use, Easy to Clean and Store • Used with both the ERC10 & EHB60 systems

This super lightweight and handy starter kit contains all of the elements required to carry out professional timber refurbishments, and neatly stores them in this compact and hard wearing recyclable cardboard box. The starter kit is made from recyclable cardboard and has internal compartments to neatly store the items inside. The box is wholly sourced in the UK.  Starter Kit contents:  1 x EHB60 400ml Repair Resin 1 x ERC10 400ml Rapid Adhesive  1 x EWS Epoxy Primer  1 x Metal Timbabuild Extrusion Tool  1 x Timbaglaze 290ml Hybrid Polymer Glazing Sealant / Putty Replacement  1 x Pair of Latex Gloves  1 x Stainless Steel Filling Knife 2"

Key Features The Timbabuild gun is a 400ml professional application and extrusion tool designed for the smooth, even delivery of EHB60 Timbabuild and Timbabuild ERC10 epoxy fillers. Durable construction: Built from high-grade steel, the Timbabuild gun delivers professional-grade strength and long-term reliability for everyday trade use. Lightweight design: Weighs only 1.32kg, reducing operator fatigue during prolonged or overhead use. Anti-vibration pressure plate: Prevents cartridge damage and ensures smooth, controlled performance. Adjustable spring tension: Easily fine-tune the Timbabuild gun’s trigger response with the integrated adjustment screw. Powerful trigger ratio: Delivers a 26:1 trigger ratio, producing up to 2kN of extrusion force for precise application. Efficient piston movement: Provides 4.5mm piston travel per stroke for consistent and even material flow. Ergonomic operation: A balanced, comfortable grip design allows for easy handling in all working conditions. Compatible with Timbabuild products: Optimised for seamless use with EHB60 Timbabuild and Timbabuild ERC10 epoxy filler cartridges.

• Styrene Free - Less harmful and VOC A+ rated. • Use with a standard silicone tool. • Cartridge System Ensures Accurate Mixing. • Hardener & Resin is extruded together in the correct ratio. • Fast and Simple to Use, Easy to Clean and Store. • High strength and durability 2 Part wood filler • Cured and ready for painting within 30 minutes (at 20ºC). • Re-usable cartridge system. • Easy to mix and apply with a decorators knife. • Natural finish can be stained, varnished or over painted.