Junkers High Performance Commercial Floor Lacquer is a two-pack, water-borne polyurethane lacquer/varnish.
For pre-finished or untreated, newly installed or sanded wooden floors in commercial and domestic areas with high levels of traffic and extreme wear
Low-odour, quick drying.
HP Commercial is a low odour, quick drying lacquer floor finish and will not change the colour of the timber leaving a natural finish.
Untreated or new wood floors require a pre treatment with Junckers Prelak Primer, Junckers Pro-Seal. or Junckers Base Prime
Combined with Junckers Pro-Seal or Junckers Base Prime as a first coat creates the appearance of an oiled finish IE "enhances the grain" with all the benefits of a hard wearing water-borne lacquered finish, for a more natural look use Prelak Primer.
For a slip resistant finish, apply one coat of Junckers HP Friction Plus
as the last coat.
For daily/weekly cleaning use Junckers Silva cleaner
. or Junckers sylva polish
which is a cleaning and maintenance polish in-one for lacquered wooden floors also provides a water-repellent film.
Use Junckers Sylva Strip
to remove old built up polish when required and then apply a fresh coat of Sylva Polish.
Available: in a clear silk-matt 50% sheen and ultra matt 10% sheen finish.
Application: by brush, short pile roller or spray.
Coverage: 10 - 12 sq meters per litre per coat
Available in 4.95 Litres (4.5L + 450ml hardner)
A two-component water-based 100% polyurethane non yellowing lacquer.
For further information and application methods health and the environment, see the technical data sheets in the Attachments Tab.